TOSHIBA T1100 SERIAL/MODEM/CLOCK CARD Card Type Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 300bps Data Bus Internal/Toshiba bus Data Modulation Protocol Bell 103/212A ITU-T V.21 [Image] CONNECTIONS Function Label Function Label RS-232-C CN1 Ribbon cable to CN4 connecting board Line out CN2 Connection to computer CN5 Ribbon cable to CN3 Grounding screw R1 connecting board USER CONFIGURABLE SETTINGS Setting Label Position DTR normal JP2 Pins 1 & 2 closed DTR forced high JP2 Pins 2 & 3 closed CD signal normal JP3 Pins 1 & 2 closed CD signal forced high JP3 Pins 2 & 3 closed Bell 103/212A select JP4 Pins 1 & 2 closed IUT-T V.21 select JP4 Pins 2 & 3 closed COMMUNICATION Setting SW1 Off Position 0 RS-232-C Position 1 Modem Position 2 SUPPORTED COMMAND SET Basic AT Commands AT, ‘+++’, ‘Comma’, A/ A, C, D, E, F, H, M, O, P, Q, S, T, V, Z S Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 Note: Please see MHI Help file for full command documentation. Proprietary AT Command Set BIT-MAPPED REGISTER S13 Format: AT [cmds] S13=n [cmds] Default: Unidentified Range: 0-220 Description: Controls parity, buffer overflow flag, and data bits. Bit Value Function 1, 0 0 Not used 2 0 Parity disabled 1 Parity enabled 3 0 Odd parity 1 Even parity 4 0 7 data bits 1 8 data bits 5 0 Not used 6 0 Buffer overflow flag disabled 1 Buffer overflow flag enabled, ERROR result code sent 7 0 8th data bit set to space when bit 4 value is 1 1 8th data bit set to mark when bit 4 value is 1 BIT-MAPPED REGISTER S14 Format: AT [cmds] S14=n [cmds] Default: Unidentified Range: 0-238 Description: Controls echo, result codes, pulse/tone dialing, and speaker control Bit Value Function 0 0 Not used 1 0 Local echo disabled 1 Local echo enabled 2 0 Result codes enabled 1 Result codes disabled 3 0 Numeric result codes 1 Verbose result codes 4 0 Not used 5 0 Pulse dialing 1 Tone dialing 6 0 Not used 1 Speaker on until carrier detected 7 0 Not used 1 Speaker always on BIT-MAPPED REGISTER S15 Format: AT [cmds] S15=n [cmds] Default: Unidentified Range: 0-110 Description: Controls DCE speed, answer/originate mode, duplex and carrier signal Bit Value Function 1, 0 00 Not used 01 110bps 10 300bps 2 0 Answer mode enabled 1 Originate mode enabled 3 0 Half-duplex enabled 1 Full-duplex enabled 5, 4 00 Not used 01 110bps 10 300bps 6 0 Carrier disabled 1 Carrier enabled BIT-MAPPED REGISTER S17 Format: AT [cmds] S17=n [cmds] Default: Unidentified Range: 0-125 Description: Controls hook status, auto-answer, speaker, low speed, ring indicator, and carrier Bit Value Function 0 0 On hook 1 Off hook 1 0 Not used 2 0 Auto-answer enabled 1 Auto-answer disabled 3 0 Speaker disabled 1 Speaker enabled 4 0 Low speed disabled 1 Low speed enabled 5 0 Ring indicator true 1 Ring indicator false 6 0 Carrier present 1 Carrier not present COMMAND MODE Type: Immediate Format: AT [cmds] ; (semicolon) [cmds] Description: Return the modem to command mode after dialing REPORT INFORMATION Type: Immediate Format: AT [cmds] In [cmds] Description: Displays information requested Command Function I0 Reports product code I1 Reports checksum I2 Tests and reports ROM checksum REVERSE MODE Type: Immediate Format: AT [cmds] R Description: Places the modem in answer mode for remote modems that are originate only SELECT CALL PROGRESS RESULT CODES Type: Configuration Format: AT [cmds] Xn [cmds] Description: Enables selection of result code format options Command Function X0 Result codes 0 - 7 enabled, result code 5 not used. Note: Hayes extended result code set not used